Dosing & Blending > Digital Disc
Colorblend A
.pdf download
Colortronic's Colorblend A is a disc dosing system for plastic granules, free flowing/non-free flowing additives and regrinds. The typical applications are injection moulding blow moulding and extrusion.
With Colorblend A dosing and blending units the main component of the raw material flows directly into the mixing hopper and the additives are dosed proportionately according to the shot weight.
Our design makes material change-over almost effortless. Simply lift two quick disconnects and remove the additive station. By the use of a spare station, change-over is immediate. If you elect not to purchase a spare station, clean up and material change occurs off the machine in minutes, reducing down time and risk of injury. Additive may also be automatically loaded by the use of one of Colortronic's hopper loaders.
Performance
- Maximum throughput 50 kg/hr (110 lbs/hr)
- Maximum shot weight 0.3 kg (0.7 lbs)
Technical Information
- Microprocessor control
- Dosing of granules and powder
- The main component flows directly into the mixer hopper
- 1 additive dosing station
- Dynamic mixer
- Operating voltage 400 VAC (+/- 10%), 50/60 Hz
Optional Equipment
- Level sensor for dosing hopper
- Spare stations for quick material changes
- Sampling device for simple calibration
- 3-position rotary disc valve under the mixing hopper (open/closed/emptying)
- Hopper loader support arms for easy positioning of the conveying units above the dosing stations
- Refill systems
- Special voltage